This book is licensed under a Creative Commons by-nc-sa 3.0 license. See the license for more details, but that basically means you can share this book as long as you credit the author (but see below), don't make money from it, and do make it available to everyone else under the same terms.
This content was accessible as of December 29, 2012, and it was downloaded then by Andy Schmitz in an effort to preserve the availability of this book.
Normally, the author and publisher would be credited here. However, the publisher has asked for the customary Creative Commons attribution to the original publisher, authors, title, and book URI to be removed. Additionally, per the publisher's request, their name has been removed in some passages. More information is available on this project's attribution page.
For more information on the source of this book, or why it is available for free, please see the project's home page. You can browse or download additional books there. To download a .zip file containing this book to use offline, simply click here.
Be sure you are familiar with the material in Essential Skills 5 (Section 10.9 "Essential Skills 5") before proceeding to the Application Problems. Problems marked with a ♦ involve multiple concepts.
♦ Oxalic acid (C2H2O4) is a metabolic product of many molds. Although oxalic acid is toxic to humans if ingested, many plants and vegetables contain significant amounts of oxalic acid or oxalate salts. In solution, oxalic acid can be oxidized by air via the following chemical equation:H2C2O4(aq) + O2(g) → H2O2(l) + 2 CO2(g)
If a plant metabolized enough oxalic acid to produce 3.2 L of CO2 on a day when the temperature was 29°C and the pressure was 752 mmHg, how many grams of oxalic acid were converted to CO2? Given that air is 21% oxygen, what volume of air was needed for the oxidation?
♦ The decomposition of iron oxide is used to produce gas during the manufacture of porous, expanded materials. These materials have very low densities due to the swelling that occurs during the initial rapid heating. Consequently, they are used as additives to provide insulation in concrete, road building, and other construction materials. Iron oxide decomposes at 1150°C according to the following chemical equation:6 Fe2O3(s) → 4 Fe3O4(s) + O2(g)
♦ A 70 kg man expends 480 kcal of energy per hour shoveling snow. The oxidation of organic nutrients such as glucose during metabolism liberates approximately 3.36 kcal of energy per gram of oxygen consumed. If air is 21% oxygen, what volume of air at STP is needed to produce enough energy for the man to clear snow from a walkway that requires 35 minutes of shoveling?
♦ Calcium carbonate is an important filler in the processing industry. Its many uses include a reinforcing agent for rubber and improving the whiteness and hiding power of paints. When calcium nitrate is used as a starting material in the manufacture of fertilizers, calcium carbonate is produced according to the following chemical reaction:Ca(NO3)2 + 2 NH3 + CO2 + H2O → CaCO3 + 2 NH4NO3
♦ Calcium nitrate used in the process described in Problem 4 is produced by the reaction of fluoroapatite—Ca5[(PO4)3(F)]—with nitric acid:Ca5[(PO4)3(F)] + 10 HNO3 → 5 Ca(NO3)2 + HF + 3 H3PO4 Ca(NO3)2 + 2 NH3 + CO2 + H2O → CaCO3 + 2 NH4NO3
Mars has an average temperature of −47°C; a surface pressure of 500 Pa; and an atmosphere that is 95% carbon dioxide, 3% nitrogen, and 2% argon by mass, with traces of other gases. What is the partial pressure (in atmospheres) of each gas in this atmosphere? A 5.0 L sample is returned to Earth and stored in a laboratory at 19°C and 1 atm. What is the volume of this sample?
♦ Chlorofluorocarbons (CFCs) are inert substances that were long used as refrigerants. Because CFCs are inert, when they are released into the atmosphere they are not rapidly destroyed in the lower atmosphere. Instead, they are carried into the stratosphere, where they cause ozone depletion. A method for destroying CFC stockpiles passes the CFC through packed sodium oxalate (Na2C2O4) powder at 270°C. The reaction for Freon-12 (CF2Cl2) is as follows:CF2Cl2(g) + 2 Na2C2O4(s) → 2 NaF(s) + 2 NaCl + C(s) + 4 CO2(g)
♦ The exhaust from a typical six-cylinder car contains the following average compositions of CO and CO2 under different conditions (data reported as percent by volume; rpm = rotations per minute):
|Species||Idling (1000 rpm)||Accelerating (4000 rpm)||Decelerating (800 rpm)|
Automobile airbags inflate by the decomposition of sodium azide (NaN3), which produces sodium metal and nitrogen gas according to the following chemical equation:2 NaN3 → 2 Na(s) + 3 N2(g)
How many grams of sodium azide are needed to inflate a 15.0 L airbag at 20°C and 760 mmHg? The density of NaN3 is 1.847 g/cm3. What is the volume of the gas produced compared to the solid reactant? Suggest a plausible reason to explain why skin burns can result from the inflation of an airbag during an automobile accident.
Under basic conditions, the reaction of hydrogen peroxide (H2O2) and potassium permanganate (KMnO4) produces oxygen and manganese dioxide. During a laboratory exercise, you carefully weighed out your sample of KMnO4. Unfortunately, however, you lost your data just before mixing the KMnO4 with an H2O2 solution of unknown concentration. Devise a method to determine the mass of your sample of KMnO4 using excess H2O2.
Carbonated beverages are pressurized with CO2. In an attempt to produce another bubbly soda beverage, an intrepid chemist attempted to use three other gases: He, N2, and Xe. Rank the four beverages in order of how fast the drink would go “flat” and explain your reasoning. Which beverage would have the shortest shelf life (i.e., how long will an unopened bottle still be good)? Explain your answer.
♦ Urea is synthesized industrially by the reaction of ammonia and carbon dioxide to produce ammonium carbamate, followed by dehydration of ammonium carbamate to give urea and water. This process is shown in the following set of chemical equations:2 NH3(g) + CO2(g) → NH2CO2NH4(s) NH2CO2NH4(s) → NH2CONH2(s) + H2O(g)
Explain what happens to the temperature, the volume, or the pressure of a gas during each operation and give the direction of heat flow, if any.
These four processes constitute the cycle used in refrigeration, in which a gas such as Freon is alternately compressed and allowed to expand in the piston of a compressor. Which step eventually causes the food in a refrigerator to cool? Where does the thermal energy go that was removed in the cooling process?
5.9 g oxalic acid, 7.8 L